Load The Filament - Geeetech A30 Pro User Manual

5.4Load the filament

Put filament on spool holder, please pay attention to the feeding direction of the filament. See
picture (5-14).
Filament is bent, therefore it needs to be straightened by your hands and trimmed to make it
easier to insert filament into feeder. Press down the lever handle of the extruder and insert the
filament into the feeding tube until it reaches extruder head. As shown by the arrow in (5-15).
Please set the target temperature of nozzle about 190-210℃ when printing PLA. Control the
extruder feeding on touch screen after the nozzle temperature is stable. See picture
Shenzhen Getech Technology Co.,Ltd
（Picture 5-14）
（Picture 5-15）
13