Table of Contents
Advertisement
pin programming
A PIN code can have one to four digits; each digit can be from 0-9.
n n o o t t e e : : A PIN code cannot begin with a zero.
Programming Procedure
1.
Enter the feature location (column 2, row 1) in the user-
selectable programming grid.
2.
Immediately press and release
3.
Select each digit by pressing
to enter the number into the system. To enter a zero,
press
To program a PIN code of 1032:
A.
Press and release
hear one chirp.
B.
Press and release
after programming a zero.
C.
Press and release
once. You will hear three chirps.
D.
Press and release
once. You will hear two chirps.
4.
Wait for two siren chirps after a five second pause or five
seconds after the last digit has been entered if using less
than four digit code number.
5.
Turn off the ignition; the siren will chirp three times.
6.
The programming mode is now exited.
30
only.
three times, and then press
of the Valet switch.
1-9 times, and then press
once and
once. You will
once. You will not hear a chirp
two times, and then press
Hide quick links:
Advertisement
Table of Contents
