Remote Sensor Disable; Remote Start Sensor Bypass - Clifford GP1000T Owner's Manual

remote sensor disable

This can be performed anytime the system is armed. Follow the proce-
dure listed below.
1. Arm the system.
2. Using the remote press
3. The indicators will flash four times; all Warn Away
optionally installed sensors are now bypassed (zones two
and three).
4. Using the remote press
again.
5. The lights will flash four more times; the sensor Warn Away
and full trigger zones are now bypassed (zones one, two,
and three). To bypass the system tilt sensor press the sensor
disable buttons twice.
6. The sensor zones will reset when disarmed.
n n o o t t e e : : Sensor disable can be performed at any time after the alarm has
been armed.

remote start sensor bypass

When the system sees a command to remote start the vehicle, it
bypasses sensor zones and will continue to bypass these zones until the
remote start shuts down.
© 2 0 0 5 d i re c t e d e l e c t ro n i c s , i n c . a l l r i g h t s re s e r v e d
and simultaneously.
and simultaneously
zones of
®
®
11