For the rest of the channels only one press of the button is
required to learn, and the siren will chirp the same number
of times as the feature row.
n n o o t t e e : : When programming a new transmitter to custom configuration,
an arm/disarm channel must first be programmed before programming
the remaining channels.
Note #3: Accessory Channel
The accessory channel output can be programmed to differ-
ent types of output including a pulsed output that does not
function when ignition is on or the system is armed, a pulsed
output regardless of the ignition/armed state, a timed out-
put, a latched output, a latched output that resets when the
ignition is turned on and a Remote start output for connec-
tion with a 561T remote starter*.
The accessory channel can also be programmed to auto-acti-
vate with the arm command of the transmitter, the disarm
command of the transmitter, or both. Consult your dealer
for more options.
* Note: Not evaluated by Thatcham.
© 2 0 0 5 d i re c t e d e l e c t ro n i c s , i n c . a l l r i g h t s re s e r v e d
29