7.
Then
digit entered with
8.
Then
9.
Then
10. Then
auto-immobilisation
Immobiliser circuits automatically activate after 30-seconds.
Auto-immobilisation sequence:
1.
Turn ignition off or disarm alarm.
2.
After 30-seconds the systems Immobilisation circuits activate
and engage the starter and engine interrupts.
3.
LED flashes at ½ normal speed.
Disarm the system when immobilised:
Use one of the following methods to turn off
auto-immobilisation.
Turn ignition on and press the
mitter.
Arm the alarm and then disarm the alarm.
Turn the ignition on and enter the system Valet/PIN code.
remote siren silencing
Remote siren silencing is a feature that makes it possible to silence and
reset the system when it is triggering without disarming the system. If
the system is triggered and the siren is sounding, press
© 2 0 0 5 d i re c t e d e l e c t ro n i c s , i n c . a l l r i g h t s re s e r v e d
once. This enters a 0 as there was not a previous
.
once.
once. This enters the final digit 1.
button once to disarm without a remote.
button of the trans-
on the
9