Display; Quick Use Guide; Setting The Day And Time - ElectrIQ EAH2000W User Manual

DISPLAY

Time
Day Indicator
Power Indicator
High Heat Mode*
Low Heat Mode*
* For 7 day timer

QUICK USE GUIDE

1. Switch the unit on using the main power switch on the rear of the unit. The
heater will make a sound, and the display will flash.
2. Press the STANDBY button to turn on the heater. The display panel will light
up, and the unit will start to operate with the default settings.
3. Set the current day and time.
4. Use the UP and DOWN buttons to change the desired temperature, and the
PROGRAM button to change between High Heat, Low Heat and Anti Frost
modes.

SETTING THE DAY AND TIME

1. With the appliance turned on, hold the DOWN button for 3 seconds until it
bleeps.
2. Change the day shown on the day indicator using the UP and DOWN
buttons.
3. Hold the DOWN button for 3 seconds until the unit bleeps to confirm the
day.
4. Change the hour value using the UP and DOWN buttons.
5. Hold the DOWN button for 3 seconds until the unit bleeps to confirm the
hour value.
6. Change the minute value using the UP and DOWN buttons.
7. Press the STANDBY button or leave for 10 seconds to save the settings.
Heating
Chile Lock
indicator
indicator
Timer
Indicator*
High Heat
Mode
Preset
Indicator
Time*
Page 7 of 24
Temperature
Display
Low Heat
Mode
WiFi
Indicator
Anti-Frost
Mode
Heating
Mode for
each hour*