Cleaning - Bartscher 5200 2ER Instruction Manual


Remove the required food from the operator side and serve.
Note: Hot display 305063 is equipped with the lifting door at the front and at the
operator side so that the food can be removed from both sides.

When the device is no longer in use, turn it off using ON/OFF switch and disconnect
from the power supply (pull the plug!).
The device is provided with 2 safety thermostats:
1. Automatic reset thermostat turns the device off in case of overheating (above
125 °C). In such a case, disconnect the device from the electric power supplly
and leave it to cool down. When it has cooled down, you can start using the
device as usual.
2. When the automatic reset thermostat is damaged and the device overheats,
the 2nd safety thermostat turns on at 150 °C and it switches off the device.
In such a case, contact the customer service or vendor.

6. Cleaning

WARNING!
Before cleaning, switch the device off by pressing
ON/OFF switch, disconnect it from the power supply
(unplug!) and leave to cool off.
The device is not suited for direct washing via water jets.
Protect the device from water penetration.
CAUTION!
Never use aggressive cleaning agents, such as scouring powders, alcohol-based
substances, or solvents which may damage the surfaces of the device.
o Clean the device regularly at the end of the working day, and also in the meantime, if
necessary or when the device is not to be used for longer time.
o Open the lifting door and remove food from the device.
- 38 -