Bartscher 5200 2ER Instruction Manual page 17

Crumb tray

Insert the crumb tray underneath the
device to collect any food scraps during
operation.
LED lighting (Code-No.: 305063)

The device interior is equipped with 4 LED lighting straps
attached along the housing edge. Turn on the interior
lighting with the designated switch located on the device
at the operator side. The green indicator integrated with
the switch will come on.
Device start-up

Connect the device to a single grounded socket.

Turn the device on using the ON/OFF switch. The red power indicator will come on
to indicate the device is on.
Heat-up and keep the food warm

Set the required temperature between 30°C and 90 °C with the temperature
control knob located on the device.

Heat-up the hot display to the set temperature without food.

The orange heating-up indicator next to the temperature control knob is on. When the
set temperature has been reached, the heating is off and the orange heating-up
inidicator is off.
- 36 -