Electric Installation; Wiring Diagram - Salda VKSA Mounting And Installation Instructions Manual

SYMBOLS AND MARKING
1 - Logo; 2 - Product code (SKU); 3 - Product name; 4 - Technical data; 5 - Production place; 6 - Lot number and production date.
DESCRIPTION
Fans are used for air supply in ventilation and air conditioning systems. Fans are not designed for functioning in explosive - inclined areas.
INSTALLATION
Rectangular duct fans are mounted into rectangular ducts of ventilation systems. Single-phase and three-phase motors are ready-wired with
thermo-contact leads and protectors. If speed controller is used, a separate thermo-contact relay is not needed.
The fan can be installed in any position.
Not recommended: the fan is not designed for using in rooms with explosive gas, grinding dust, soot, flour etc.
Accessories: flexible connections, speed controllers, filter boxes, air dampers.

ELECTRIC INSTALLATION

Electrical connection is made through a terminal box, which is stated on the casing. The fan must be connected to the mains by a qualified elec-
trician only.
1. Check if the voltage and frequency corresponds with the specifications put on the fan's ID plate.
2. All electrical wiring and connections must be carried out in compliance with national safety regulations.
Important! The fan must be grounded.

WIRING DIAGRAM

#1:
U
1
brown
#2:
U U
1
brown red
2 | EN
1
3
Product name
Nominal voltage frequency /
4
Max.current
Max.power consumption
Protection class
5
Made in Šiauliai, Lithuania
Figure 1.1 - Technical label
Figure 1.2 - Indication for air flow direction.
U
2
blue
Δ - 3~230V
V
2 1
blue
SKU000000
000 0 VAC / 0 /Hz
00.00 A
0.00 kW
IP 00
LN: LN000000 2019.01.01
1~230V
Z
1
black orange
Y - 3~400V
V W
2 1
grey black
2
6
Z TK
2
white
W
2
orange white
VKSA v2019.04
TK