Laser Safety - MICRO-EPSILON scanCONTROL 3010/BL Assembly Instructions Manual

5.

Laser Safety

The scanCONTROL 30xx/BL sensors operate with a semiconductor laser having a
wavelength of 405 nm (visible/blue). The laser operation is indicated visually by the
LED on the sensor.
Laser Class 2M
scanCONTROL 30xx/BL sensors with a maximum laser power up to 10 mW are classi-
fied in Laser Class 2M (IIM). The laser warning labels for Germany have already been
applied. Those for other non German-speaking countries an IEC standard label is
included in delivery and the versions applicable to the user's country must be applied
before the equipment is used for the first time.
Laser label and
warning label acc. to
i
If the information labels are hidden in the installed state, the user must ensure
that additional labels are fitted at the point of installation.
i
Laser areas must be marked duarably and clearly, if the laser beam runs
through a work or traffic area. Class 2M laser devices are not subject to re-
porting and a laser protection officer is not required.
LASER RADIATION
DO NOT STARE INTO BEAM
OR EXPOSE USERS OF
TELESCOPE OPTICS
CLASS 2M LASER PRODUCT
IEC 60825-1: 2014
P ≤ 10mW, P ≤ 10mW; E≤ 6mW/cm²;
0 P
λ = 405nm; F = 0...25kHz, t = 7µs...∞
IEC 60825-1
Hazard to the eye via laser radiation! Consciously close your
eyes or turn away if the laser radiation impinges on the eye.
COMPLIES WITH 21 CFR 1040.10 AND 1040.11
EXCEPT FOR CONFORMANCE WITH
IEC 60825-1 ED. 3., AS DESCRIBED IN
LASER NOTICE NO. 56, DATED MAY 8, 2019
Laser label
acc. to IEC 60825-1
for USA only