Multifunction Port - MICRO-EPSILON scanCONTROL 3010/BL Assembly Instructions Manual

6. Connections, LED Displays
1 2

Multifunction Port

Designation
+Ub
GND
+Laser on/off
-Laser on/off
RS422
/RS422
GND RS422
In1
In2
In3
In4
GND-In
Screen
2
3
10
1
9
6
8
7
12
12-pin screw connector, view on solder pin side (cable)
RS422, Synchronization
The RS422 connection (Pin 11 and 12 of the multifunction port) can be used with
either of the following configurations:
- RS422 (half-duplex): Load user modes, sensor control and transmit measurement
results (Modbus RTU or ASCII-Format).
- Synchronization/triggering: Synchronization respectively triggering using switching
signals.
Sensor con-
nector Pin PCR2600/2900-x
9
2
3
1
12
11
10
4
6
8
5
7
Housing
GND: galvanically isolated from IN1, 2, 3, 4, RS422,
Laser on/off
4
11
Laser on/off: Input galvanically isolated from GND,
5
IN1...4, RS422
IN1, IN2, IN3, IN4, RS422: Inputs galvanically isolated
from GND and Laser on/off
1 Multifunction port (Power supply, IO)
2 Ethernet port
Cable color
red
blue
white
brown
red-blue
gray-pink
purple
green
yellow
gray
pink
black
black Not electrically connected to GND
Notes
+ 11 V - 30 V DC
(rated value 24 V); max. 5 W
0 V
available with SI option
RS422
input respectively output
Ground connection RS422
Switching input In1
Switching input In2
Switching input In3
Switching input In4
Ground connection In