Panic Mode (Optional) - Directed Electronics Automate 417 Owner's Manual

NOTE: This feature is only available if your system has been programmed
with the Level I security setting. (See Glossary section of this manual for
Level I security description.) Consult with your installer to determine if
your vehicle has been programmed for Level I security.
To disarm the security system with the vehicle's door key:
1. Insert the key into one of the door key cylinders.
2. Turn the key until the vehicle door(s) unlocks. The siren
will chirp to confirm that the security system has been
disarmed.

Panic Mode (Optional)

Panic Mode is a programmable option of your security system. (See
Programming Options section of this guide.) This is because most
original equipment from the manufacturer (OEM) keyless entry
systems already have a remote-activated panic feature. In order for
Panic Mode to be operational, the siren or horn must be connected
to the security system.
If you are threatened in or near your vehicle, you can attract
attention by activating Panic Mode. Press the lock button on your
factory keyless entry transmitter twice within three seconds
to sound the siren and flash the parking lights for 30 seconds. To
stop Panic Mode at any time, press the unlock button on your
transmitter.
NOTE: Panic Mode is not available with all factory keyless entry
systems, due to the fact that the lock button may not be triggered a
second time once the vehicle doors have been locked with the factory
transmitter.
6
2000 Directed Electronics, Inc.
©