Directed Electronics Automate 417 Owner's Manual page 18

Level II Security: A high security setting that protects your vehi-
cle at the door and trunk key cylinders. With Level II security, the
system cannot be disarmed at the door key cylinder with a vehi-
cle key. Also, the trunk cannot be accessed with the vehicle key
while the system is armed, without triggering the alarm. (The
transmitter can still be used to disarm the system and to access
the trunk while the system is armed.) Level II security will
protect your vehicle in cases when someone with an unauthorized
coded key attempts to enter the vehicle. It also offers protection
if someone attempts to force one of the key cylinders to unlock
the vehicle.
Shock Sensor: A dual-stage shock sensor located on the control
module that detects impacts to the vehicle or glass.
Starter Interrupt Relay: An automatic switch controlled by the
system that prevents the starter from cranking whenever the
system is armed. The vehicle is never prevented from cranking
when the system is disarmed, in Valet Mode, or if the starter inter-
rupt relay fails.
Trigger or Triggered Sequence: The "setting off" or "tripping" of
the alarm. A Triggered Sequence consists of the siren sounding and
the parking lights flashing for 30 or 60 seconds.
Valet Switch: A small, push-button switch mounted inside the
vehicle, at a location determined by the installer. This switch is
used to override the alarm when a transmitter is lost or damaged.
The Valet switch can also be used to put the system into Valet Mode.
15
2000 Directed Electronics, Inc.
©