Fcc/Id Notice; Using Your System; Arming - Directed Electronics Automate 417 Owner's Manual

FCC/ID Notice

This device complies with Part 15 of FCC rules. Operation is subject
to the following two conditions: (1) This device may not cause
harmful interference, and (2) This device must accept any interfer-
ence received, including interference that may cause undesired
operation.
Caution: Changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to
operate this device.

Using Your System

Arming

You can arm the security system by locking the vehicle doors with
your factory keyless entry transmitter. When the system arms, you
will hear a short siren sound (chirp) and the parking lights will
flash once. Once armed, the status LED will flash once per second
to indicate that your vehicle is being actively protected. If you
hear a second chirp after arming and notice that the status LED is
flashing in a grouped pattern, this signals Bypass Notification,
which is described in the Diagnostics section of this manual.
NOTE: If the ignition is turned on within 60 seconds of arming the secu-
rity system, the system will automatically disarm.
2000 Directed Electronics, Inc.
©
3