Table of Contents
Advertisement
6. Starting the calibration
programme
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Cottons programme
must be run without laundry and
without detergent.
No other programmes can be started
until calibration has been carried out.
The following message appears in the
display:
Turn on the tap and run the Cottons 90°C
programme without any laundry
Confirm with the OK sensor.
The display will then change to the
standard display for the Cottons
programme.
Overview
Temperature
90 °C
Cottons
TwinDos
Whites
1:57
h
Timer
Touch the Start/Stop sensor.
The calibration programme is started. It
will take approximately 2 hours.
At the end of the programme the
following message will appear in the
display:
Set-up completed
Before using for the first time
Reach under the door grip and pull
the door open.
Useful tip: For safety reasons, close the
door when the washing machine is not
in use. Otherwise there is a danger of
objects being placed inadvertently in
the drum. If these remain unnoticed and
were washed in the next load, they
could damage the laundry. An open
door is also a danger to pets and
children.
11:02
Switch the washing machine off with
the control.
Spin speed
1600
rpm
Extras
not selected
Save
25
Hide quick links:
Advertisement
Table of Contents
