Smartgrid; Remote Control - Miele WCR 890 WPS Operating Instructions Manual

SmartGrid

The SmartGrid setting (available
depending on country) is only visible if
the
Miele@home
activated.
This function can be used for starting
your washing machine automatically
at a time when your energy supplier's
energy costs are most economical.
Activating
SmartGrid
sensor a new function. Use the "Timer"
sensor to set SmartStart. The washing
machine will then start within the
timeframe specified by you when it
receives a signal from your energy
supplier.
If it has not received a signal from the
energy supplier by the latest start time
set, the washing machine will start
automatically (see "Delay start").
SmartGrid is deactivated as standard.
setting is set up and
gives the Timer

Remote control

The Remote control
depending on country) is only visible if
the
Miele@home
activated.
Once the Miele@mobile App has been
installed on your mobile device, you
can check the status of your washing
machine from anywhere and start it
remotely. You can also control it
remotely via the MobileControl
function.
You can switch off the
setting if you do not want to operate the
washing machine with your mobile
device.
If is not switched on, the
Remote control
App can cause the programme to be
cancelled.
Use the "Delay start" sensor to set a
timeframe within which you want to
start the washing machine (see "Delay
start/SmartStart").
The washing machine will then start
within the timeframe specified when it
receives your signal.
If it has not received a start signal by
the latest start time set, the washing
machine will start automatically.
Remote control is activated as
standard.
Settings
setting (available
setting is set up and
Remote control
107