Refitting The Transit Bars - Miele WCR 890 WPS Operating Instructions Manual


Risk of injury from sharp edges.
There is a risk of injury from reaching
into holes that are not covered.
To avoid the risk of injury, the holes
for the transit bars must be covered
after the transit bars have been
removed!
 Fit the stoppers onto the two holes.
Installation and connection
 Secure the transit bars to the back of
the washing machine. Make sure that
the top catch is located above the
holder.

Risk of damage from incorrect
transport.
The washing machine may become
damaged if moved without the transit
bars in place.
Keep the transit bars in a safe place.
Fit them again if the machine is to be
moved (e.g. when moving house).

Refitting the transit bars

Refitting is carried out by reversing the
procedure.
89