Connection To The Water Supply - Miele WCR 890 WPS Operating Instructions Manual

The electronic unit  and drainage
and overflow protection
– Drainage protection
Any leaking water is collected in the
sump  in the base of the machine.
A float switch  closes the solenoid
valves , preventing any more water
from flowing into the machine and
water in the suds container is
pumped away.
– Overflow protection
If the water level exceeds a certain
level, the drain pump  switches in
and pumps the excess water away in
a controlled manner.
Should the water level rise repeatedly
in an uncontrolled way, the drain
pump  will switch on continuously,
the washing machine will indicate
that there is a fault and a tone will
sound.
Drain hose
The drain hose is protected by a
ventilation system which prevents the
washing machine from being emptied
completely.
Installation and connection

Connection to the water supply


Risk of electric shock!
There are electrical wires in the water
inlet hose.
The inlet hose must not be
connected in an area subject to
spray water, e.g. in a bathroom or
shower room.
The casing on the water inlet hose
must not get wet.
The protective sleeve must not be
damaged or kinked.
93