Before using for the first time
Settings for compartment
The dispensing quantity for
UltraPhase 2 for (hardness range
I) is preset.
Dosage for comp.
Confirm the preset value with the OK
sensor, or change the value.
UltraPhase 2
Hardness level I
Hardness level II
Hardness level III
The following appears in the display:
Insert container
Remove the foil from the detergent
cartridge.
24
38
37
36
ml
35
34
36 ml
45 ml
54 ml
11:02
Push the UltraPhase 2 detergent
OK
cartridge into compartment 2 until it
locks into position.
When the cartridge is pushed in, the
display message switches to:
"TwinDos" is set up. Changes can be
made in "Settings" / "TwinDos".
Confirm with the OK sensor.
Close the TwinDos access panel.
The display changes to the calibration
programme.