Lifting The Unit - Generac Power Systems MLT4060M Owner's Manual

Lifting the Unit

Follow these steps to prepare the unit for lifting:
1. Verify the equipment being used to lift the unit is in
good condition and has sufficient capacity. For
approximate weights, refer to Specifications.
2. See Figure 3-12. Close and lock all hoods and
doors and stow the lights as shown.
3. Verify the cradle locking pin is in place.
4. When lifting the light tower and trailer, attach any
slings, chains or hooks directly to the central lifting
eye (A).
5. Always remain aware of people and objects around
the unit while preparing, maneuvering, and lifting
the unit.
6. Use the upper (B) or lower forklift pockets (C) with
care. Approach the unit as perpendicular as
possible to avoid any damage to the unit. Make
sure the mast winch handles or any other
obstructions are clear of the forklift tines before
lifting.
B
A
Figure 3-12. Lifting Point
Owner's Manual for MLT Light Tower
C
C
004745
Operation
21