Advertisement
Scope
There are three methods to update T-BERD 6000A V2 software:
1. Network upgrade - Use this method to update your T-BERD via an Internet connection.
2. USB upgrade - Use this method to update your T-BERD with a USB thumb drive.
3. StrataSync upgrade - Use this method if your T-BERD 6000A V2 is managed using Viavi's
StrataSync Asset Management system.
The T-BERD must be connected to AC Power, regardless of update method.
1. Network Upgrade
Step
Action
1.
Power On
2.
AC Power
3.
LAN Connection
4.
Home
Technical Support
Details
Press and hold the ON/OFF button briefly to turn on the T-BERD 6000A V2.
Connect the AC power adapter to the
power connector on the top of the
T-BERD 6000A V2.
Connect the Ethernet Management
Port on the top of the T-BERD 6000A V2
to a network connection with internet
access, using CAT 5E or better cable.
Press the HOME button, at the right side of the display, to display the HOME
screen selections.
tac@viavisolutions.com
Page 2 of 13
1-844-468-4284 option 3, 1, 1
Advertisement
