Software Version; Legal Information; Showroom Programme; Factory Default - Miele DGC 7860 X Operating And Installation Instructions

Software version

The software version is intended for the
Miele Customer Service Department.
You do not need this information for do-
mestic use.
 Confirm with OK.

Legal information

You can find an overview of the integ-
rated Open Source components under
Open source licences
 Confirm with OK.

Showroom programme

This function enables the steam oven to
be demonstrated in showrooms without
heating up. This setting is not needed
for domestic use.
Demo mode
If you have demo mode activated,
Demo mode switched on. The appliance
will not heat up will appear when you
switch the steam oven on.
– On
Touch OK for at least 4 seconds to
activate demo mode.
– Off
Touch OK for at least 4 seconds to
deactivate demo mode. You can then
use the steam oven as normal.
.

Factory default

– Appliance settings
Any settings that have been altered
will be reset to the factory default
settings.
– User programmes
All User programmes will be deleted.
– MyMiele
All MyMiele entries will be deleted.
– Network configuration
The network configuration is reset to
the factory default settings.
– Recommended temperatures
Any recommended temperatures that
have been changed will be reset to
the factory default settings.
Settings
57