Miele DGC 7860 X Operating And Installation Instructions page 23

Fitting and removing FlexiClip run-
ners

Risk of injury caused by hot sur-
faces.
The steam oven gets hot during op-
eration. You could burn yourself on
the heater elements, oven compart-
ment, side runners or accessories.
Allow the heater elements, oven
compartment, side runners and the
accessories to cool before fitting or
removing the FlexiClip runners.
The FlexiClip runners are fitted in
between the two rails that make up a
shelf level.
The FlexiClip runner with the Miele logo
should be fitted on the right.
When fitting or removing the FlexiClip
runners, do not extend them.
 Hook the FlexiClip runner onto the
front of the lower rail of a shelf level
(1.) and then push it along the rail into
the oven compartment (2.).
Guide to the appliance
 Then secure the FlexiClip runner to
the lower rail of the shelf level (3.).
If the FlexiClip runners are difficult to
pull out after fitting, pull firmly on them
once to release them.
To remove a FlexiClip runner, proceed
as follows:
 Push the FlexiClip runner in all the
way.
 Remove the FlexiClip runner by rais-
ing it at the front (1.) and then pulling
it forwards along the rail of the shelf
level and out (2.).
23