Remote Control; Activating Mobilestart - Miele DGC 7860 X Operating And Installation Instructions

Settings
– Activate
This setting is only visible if
Miele@home is deactivated. The WiFi
function is reactivated.
–
Deactivate
This setting is only visible if
Miele@home is activated.
Miele@home remains set up, the WiFi
function is switched off.
– Connection status
This setting is only visible if
Miele@home is activated. The display
shows information such as the WiFi
reception quality, network name and
IP address.
–
Set up again
This setting is only visible if a WiFi
network has already been set up. Re-
set the network settings and immedi-
ately set up a new network connec-
tion.
– Reset
This setting is only visible if a WiFi
network has already been set up. The
WiFi function is deactivated and the
WiFi connection will be reset to the
factory default setting. You must set
up a new WiFi connection to be able
to use Miele@home.
–
Set up
This setting is only visible if there is
no existing WiFi connection. You
must set up a new WiFi connection to
be able to use Miele@home.
54

Remote control

If you have installed the Miele@mobile
app on your mobile device, have ac-
cess to the Miele@home system and
have activated the remote control func-
tion ( ), you can use the MobileStart
On
function to retrieve information on
steam oven cooking programmes that
are in progress or to end a programme
in progress.

Activating MobileStart

 Select the  sensor control to activ-
ate MobileStart.
The  sensor control lights up. You
can operate your steam oven remotely
with the Miele@mobile app.
Directly operating the steam oven via
the touch display takes priority over
operating it via the remote control
function on the app.
You can use MobileStart as long as
the  sensor control is lit up.