BenQ RP553K Protocol Manual page 18

Backlight 8
Network Setting 14
1 g B4
g E1
007: Dutch
008: Polish
009: Russia
010:Czech
011:Danish
012:Swedish
013:Italian
014:Romanian
015:Norwegian
016:Finnish
017:Greek
019:Arabic
020:Japanse
021: Thailand
023 : Hungarian
024 : Persian
025 : Vietnamese
026 : Indonesia
000 ~ 100
18
007: Dutch
008: Polish
009: Russia
010:Czech
011:Danish
012:Swedish
013:Italian
014:Romanian
015:Norwegian
016:Finnish
017:Greek
019:Arabic
020:Japanse
021: Thailand
023 : Hungarian
024 : Persian
025 : Vietnamese
026 : Indonesia
000 ~ 100
Input Value: Byte1 - Byte2 - Byte3...Byte9
(1) Byte1=0x00: IP Setup Mode
Byte1=0x01: IP Address
Byte1=0x02: Get Subnet Mask
Byte1=0x03: Default Gateway
Byte1=0x04: Primary DNS
Byte1=0x05: Secondary DNS
Byte1=0x06: MAC Address
(2) Byte2~9 are reserved, should be 0x00.
Return value: Byte1 - Byte2 -
Byte3...Byte9
The Byte1 at the return value should be
the same as the value of Byte1 at Input
value. Byte2~Byte15 should be hex value
format
(1) If Byte1=0x00(IP Setup Mode) at Input
value, the return value should be
Byte1=0x00
Byte2=0x00: Manual