BenQ RP553K Protocol Manual page 11

Switch on Staus 8
WOL 8
1 g DA
g F0
000 : Power Off
001 : Force On
002 : Last Status
000: Off
11
Return value: Byte1 - Byte2 -
Byte3...Byte9
The Byte1 at the return value should be
the same as the value of Byte1 at Input
value. Byte2~Byte15 should be hex value
format
(1) If Byte1=0x00(IP Setup Mode) at Input
value, the return value should be
Byte1=0x00
Byte2=0x00: Manual
0x01: DHCP
Byte3~9 are reserved, should be
0x00.
(2) If Byte1=0x01(IP Address) at Input
value, the return value should be
Ex: IP address=169.254.81.38
Byte1=0x01 (same as Byte1 at
Input value)
Byte2=0xA9 (=169), Byte3=0xFE
(=254), Byte4=0x51(=81), Byte5=0x26
(=38)
Byte6~9 are reserved, should be
0x00.
(3) If Byte1=0x02~0x05 at Input value,
refer to (2)
(4) If Byte1=0x06(MAC Address) at Input
value, the return value should be
Ex: MAC
address=00:22:64:7E:2C:82
Byte1=0x06 (same as Byte1 at
Input value)
Byte2=0x00, Byte3=0x22,
Byte4=0x64, Byte5=0x7E, Byte6=0x2C,
Byte7=0x82
Byte8~9 are reserved, should be
0x00.
000 : Power Off
001 : Force On
002 : Last Status
000: Off