Hardware Overview; Front Panel Button - Ubiquiti EdgeSwitch 10 XP Quick Start Manual

Hardware Overview

Front Panel Ports
Interface
RJ45 1‑8
SFP 9‑10

Front Panel Button

Button
Reset
RJ45 Ports 1-8
Description
RJ45 ports support 10/100/1000 Ethernet
connections and 24V Passive Power over
Ethernet (PoE) output.
Hot‑swappable SFP ports support 1 Gbps
connections.
Description
To reset to factory defaults:
1. Disconnect power from the EdgeSwitch.
2. Reconnect power while holding the
Reset button. The port LEDs will light
up in sequential order (this takes
approximately five seconds).
3. When the port 1 LED flashes again,
release the Reset button.
SFP Ports 9-10
Reset