Ubiquiti EdgeSwitch 10 XP Quick Start Manual page 14

6. Change the IP Address to a unique IP address or keep the
default, DHCP. Click Apply.
Note:
be cut off, and you will need to reconnect to the
EdgeSwitch using the new IP address.
The EdgeSwitch Configuration Interface will appear.
Customize additional settings as needed. For 24V Passive PoE
configuration, refer to the Configuring PoE Settings section. For
more information, refer to the EdgeSwitch documentation,
which is available at www.ubnt.com/download/edgemax
You can also manage your device using UNMS, which lets you
configure, monitor, upgrade, and back up your devices using a
single application. Get started at www.unms.com
If you change the IP settings, the session will