Specify Wireless Settings - TP-Link Archer AX3000 User Manual

Chapter 12
Description: Enter a description for this static routing entry.
5. Click OK.
6. Check the System Routing Table
static routing is set successfully.
Done!
Open a web browser on your PC. Enter the company server's IP address to visit the
company network.

12. 7. Specify Wireless Settings

The router's wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
router.
• To enable or disable the wireless function:
1. Go to Basic > Wireless.
2. The wireless radio is enabled by default. If you want to disable the wireless function
of the router, just untick the
wireless settings will be invalid.
• To change the wireless network name (SSID) and wireless password:
1. Go to Basic > Wireless.
2. Create a new SSID in
network in Password. The value is case-sensitive.
Note:
If you change the wireless settings with a wireless device, you will be disconnected when the settings are effective.
Please write down the new SSID and password for future use.
• To hide SSID:
1. Go to Basic > Wireless.
below. If you can find the entry you've set, the
Enable Wireless Radio
Network Name (SSID)
Customize Your Network Settings
checkbox. In this case, all the
and customize the password for the
73