Faq - TP-Link Archer AX3000 User Manual

FAQ

Q1. What should I do if I forget my wireless password?
The default wireless password is printed on the label of the router. If the password has
been altered:
1. Connect your computer to the router using an Ethernet cable.
2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
3. Go to Basic > Wireless
Q2. What should I do if I forget my web management password?
• If you are using a TP-Link ID to log in, or you have enabled the Password Recovery
feature of the router, click
instructions to reset it.
• Alternatively, press and hold the
it, and then visit http://tplinkwifi.net
Note:
• Please refer to Password Recovery
• You'll need to reconfigure the router to surf the internet once the router is reset, and please mark down your new
password for future use.
Q3. What should I do if I can't log in to the router's web management
page?
This can happen for a variety of reasons. Please try the methods below to log in again.
• Make sure your computer is connected to the router correctly and the corresponding
LED indicator(s) light up.
• Make sure the IP address of your computer is configured as
automatically and
• Make sure http://tplinkwifi.net
• Check your computer's settings:
1 ) Go to Start
status and tasks.
2 ) Click Internet Options
3 ) Click Connections
to retrieve or reset your wireless password.
Forgot password
Reset
to create a new login password.
to learn how to configure Password Recovery.
Obtain DNS server address
or http://192.168.0.1
> Control Panel >
on the bottom left.
and select Never dial a
on the login page and then follow the
button of the router until LEDs turn on to reset
automatically.
is correctly entered.
Network and Internet, and click
connection.
Obtain an IP address
View network
98