TP-Link Archer AX3000 User Manual page 87

Chapter 13
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced >
3. Enter the information with the help of page tips:
1 ) Choose Ping
• Ping is used to test the connectivity between the router and the tested host,
and measure the round-trip time.
• Traceroute is used to display the route (path) your router has passed to reach
the tested host, and measure transit delays of packets across an Internet
Protocol network.
2 ) Enter the IP Address
4. Click Start to begin the diagnostics.
Tips:
Click Advanced, you can modify the ping count, ping packet size or the Traceroute Max TTL. It's recommended to keep
the default value.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Ping.
The figure below indicates the proper connection between the router and the Yahoo
server (www. Y ahoo.com) tested through Traceroute.
System Tools > Diagnostics.
or Traceroute as the diagnostic tool to test the connectivity;
or Domain Name of the tested host.
Manage the Router
82