Change The Lan Settings; Set Up Link Aggregation - TP-Link Archer AX3000 User Manual

Wifi 6 router
Hide thumbs Also See for Archer AX3000:
Table of Contents

Advertisement

Chapter 12

12. 1. Change the LAN Settings

The router is preset with a default LAN IP 192.168.0.1, which you can use to log in to
its web management page. The LAN IP address together with the Subnet Mask also
defines the subnet that the connected devices are on. If the IP address conflicts with
another device on your local network or your network requires a specific IP subnet, you
can change it.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Type in a new IP Address appropriate to your needs. And leave the
the default settings.
4. Click Save.
Note:
If you have set the Virtual Server, DMZ or DHCP address reservation, and the new LAN IP address is not in the same
subnet with the old one, then you should reconfigure these features.

12. 2. Set Up Link Aggregation

The Link Aggregation feature combines two ports together to make a single high
bandwidth data path, thus sustaining a higher-speed and more stable wired network.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to
Advanced
>
3. Enable
Link Aggregation
The LAN3 and LAN4 ports will be used for Link Aggregation.
Network
> LAN.
Network
> LAN.
and click Save. The router will reboot to apply the settings.
Customize Your Network Settings
Subnet Mask
as
66

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Archer AX3000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Table of Contents

Save PDF