TP-Link Archer AX3000 User Manual page 26

Chapter 4
3 ) PPPoE: By default, the router uses the IPv4 account to connect to the IPv6
server. Click
Save and then click Connect.
Note:
If your ISP provides two separate accounts for the IPv4 and IPv6 connections, please untick the
session with IPv4 connection
4 ) 6to4 Tunnel:
connection type
input further information if your ISP requires. Click
5 ) Pass-Through (Bridge):
Advanced to input further information if your ISP requires. Click
checkbox and manually enter the username and password for the IPv6 connection.
An IPv4 internet connection type is a prerequisite for this
(Manually Set Up Your Internet
Click Save
Set Up Internet Connection
Connection). Click
Save
and skip to Step 6.
PPPoE same
Advanced
and then click Connect.
to
22