D-Link DG-102S User Manual page 55

tftp update
Current Settings :
TFTP Server IP Address : 172.16.6.245
Image File Name : 102nmm01.tfp
tftp srvip <IP ADDRESS>
Definition: This command sets the IP address of the TFTP server. The image must be resident on that
TFTP server. If the IP address is invalid, the message ERROR will be displayed.
Example: ggdbg>tftp srvip 172.16.6.245
OK
tftp get <FILENAME>
Definition: Gets the image from the TFTP server. The <FILENAME> is the name of the image on the
TFTP server. If any error happened during downloading image, the message ERROR will
be displayed. When the user enters tftp get, the file name in EEPROM will be employed.
Example: ggdbg>tftp get c:\102nmm.tfp
Download d:\project\dg102\102nmm.tfp ...\
OK
tftp update
Definition: This command updates the image in FLASH. The image is downloaded for storage in
DRAM. If any error happens during the update of the image, the message ERROR will be
displayed.
Example: ggdbg>tftp update
.. Erase Runtime Flash Memory
.. Program Runtime Flash Memory ... Done
OK
if <FILENMAE> is not specified, the
image file name in EEPROM will be
employed.
– update the image in flash
... Done
49
DG-102S VoIP Station Gateway