Configure Snmp - D-Link DG-102S User Manual

Each item on the IP Configuration screen is described below:
♦ Notify Entity Enter the appropriate information for you call agent into this field.
♦ Residential GW
consists of the IP address or a normal name.
♦ BOOTP Use the <Space> key to choose the method that the VoIP gateway will use to obtain its IP
settings once it is rebooted (restarted). Choices include:
Manual – When Manual is chosen, the VoIP gateway will obtain its IP settings from the fields located
just below.
BOOTP – When BOOTP is chosen, the VoIP gateway will attempt to obtain its IP settings from a
BOOTP server located on your LAN.
DHCP – When DHCP is chosen, the VoIP gateway will attempt to obtain its IP settings from a DHCP
server located on your LAN.
♦ IP address Enter an IP address for the VoIP gateway.
♦ Subnet mask Enter a subnet mask for the VoIP gateway.
♦ Default gateway Enter the IP address of the WAN device (usually a router) you are using to make the
WAN connection.
After you have finished, press <Ctrl+S> to save changes to RAM. Next, press the <Esc> key to return to the Boot
Menu. Position the cursor over the Save Changes item and press <Enter>. This will save the settings to NV-RAM
so they will still be present after powering off or restarting the device. Make sure the Reset button on the rear
panel of the device is in the down position. Position the cursor over the Restart System item and press <Enter>
for the changes to take effect. Your VoIP is now configured for use.

Configure SNMP

Boot Menu---IP Configuration screen
This is the name your VoIP gateway will be known as by the call agent. It usually
17
DG-102S VoIP Station Gateway