Configuration Settings; Configure Ip - D-Link DG-102S User Manual

DG-102S VoIP Station Gateway
Initial Screen, First Time Connecting to the device
If the boot up process has proceeded too far and you did not reach the Boot Menu shown above, unplug the device,
plug it back in (to restart the boot up process), and press <Ctrl+C> until the Boot Menu appears.

Configuration Settings

In order for the VoIP to function, you must provide the device with the following information:
♦ Define where the device receives its IP settings from.
♦ IP settings – IP Address, Subnet Mask, and Default Gateway
♦ Notify Entity – The address of the call agent
♦ Residential Gateway – A name for the VoIP gateway as it will be known by the call agent.
All of these settings are found in the first menu item in the Boot Menu named IP Configuration.

Configure IP

Use the <Tab> key to highlight the first menu item Configure IP and press <Enter>. The IP Configuration
screen will now be displayed:
8