D-Link DG-102S User Manual page 53

nwdbg dtmf_relay <0|1>
Definition: This command turns the Dual Tone Multiple Frequency (DTMF) relay function on or off, or
shows the DTMF relay state if only nwdbg dtmf_relay is typed.
Parameter(s): <0 : off, 1 : on>
Example: nwdbg dtmf_relay 0
nwdbg mac <MAC ADDRESS>
Definition: This command sets the MAC address of the voice link, or shows the MAC address if only
nwdbg mac is typed.
Parameter(s): <MAC ADDRESS, the format is XX:XX:XX:XX:XX:XX>
Example: nwdbg mac 00:50:ba:08:24:56
nwdbg ip <dhcp|bootp|manual>
Definition: This command sets the software boot mode to DHCP or BOOTP or Manual mode.
If only nwdbg ip is typed, this command shows the IP configuration.
DHCP: While the system is booting, the system acts as a DHCP client.
BOOTP: While the system is booting, the system acts as a BOOTP client. This mode is used
to set the device's IP address and upgrade the software.
Manual: While the system is booting, the system uses a fixed IP address. The fixed IP
address can be set by nwdbg ip <IP ADDRESS>.
Parameter(s): <dhcp|bootp|manual>
Example: nwdbg ip dhcp
nwdbg ip <IP ADDRESS>
Definition: This command sets the fixed IP address, which is used as the system's IP address if the
software boot mode is Manual mode.
If only nwdbg ip is typed, this command shows the IP configuration.
Parameter(s): <IP ADDRESS>
Example: nwdbg ip 10.1.1.120
nwdbg mask <SUBNET MASK>
Definition: This command sets the fixed subnet mask, which is used as the system's subnet mask if the
software boot mode is Manual mode.
If only nwdbg mask is typed, this command shows the IP configuration.
Parameter(s): <SUBNET MASK>
Example: nwdbg mask 255.0.0.0
nwdbg gw <GATEWAY IP>
Definition: This command sets the fixed GW address, which is used as the system's GW address if the
software boot mode is Manual mode.
If only nwdbg mask is typed, this command shows the IP configuration.
Parameter(s): <GATEWAY IP>
Example: nwdbg gw 10.1.1.254
nwdbg tftp <0|1>
Definition: This command sets the software download link to either a WAN link or a LAN link.
If only nwdbg tftp is typed, this command shows the download link.
Parameter(s): <0:WAN link, 1:LAN link>
Example: nwdbg tftp 0
nwdbg ca <NOTIFY ENTITY>
Definition: This command sets the address of notify entity.
47
DG-102S VoIP Station Gateway