Connecting To Your Network - D-Link DFE-670 TXD Quick Install Manual

M-DFE-670TXD-NEW.QXD 3/15/2001 11:01 AM Page 11
If this screen appears,
click Yes to restart the computer.
3

Connecting to your network

After the Hardware Wizard has completed
the installation of the DFE-670TXD, you
can make your network connection.
Please insert one end of the RJ-45 plug
into the opening in the DFE-670TXD
Ethernet PC Card, and then insert the
other end of the RJ-45 cable into your
networking hub or switch.
You are now networked!
Please see Appendix A to check for proper installation of your DFE-670TXD
using the Device Manager.
Please see Appendix B for more information on types and lengths of cable that
can be used to connect your network.
Note: For more information on alternate networking possibilities, please see the
Networking Basics and the Getting Started sections of the User's Manual.