Step 2: Attach The Media Coupler; Step 3: Connect To The Network Medium - D-Link DFE-680TX User Manual

Fast ethernet pc card for cardbus

Hide thumbs Also See for DFE-680TX:

Table of Contents

easy to do: just reinstall the DFE-680TX in another slot.

Step 2: Attach the Media Coupler

The back-end receptacle of the DFE-680TX remains accessible (approximately flush with

the case of the computer) when the DFE-680TX is properly seated in its PC Card slot.

Taking care to keep the top side of the media coupler plug up, insert the plug into the

DFE-680TX's receptacle until it is firmly seated and latched. (The top side of the plug is

labeled with a triangle molded into the plastic.)

NOTE: When the media coupler plug is firmly seated, it is held in place by small

latching hooks at either side of the plug. To avoid damage when detaching the plug from

the DFE-680TX, it is necessary to depress the latch wings of the plug. See the following

section, " Remove the DFE-680TX."

Make the network connection by running a UTP cable from the supporting switch or hub

to your media coupler. Simply plug one end (RJ-45 plug) of the cable into an available

port of the switch or hub, and plug the other end (RJ-45 plug) into the RJ-45 socket of

your media coupler.

Table of Contents