D-Link AirPlus G DWL-G510 Quick Installation Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Computer Hardware
  5. AirPlus G DWL-G510
  6. Quick installation manual

D-Link AirPlus G DWL-G510 Quick Installation Manual

Wireless g pci adapter
Hide thumbs Also See for AirPlus G DWL-G510:
Table of Contents

Advertisement

Quick Links

Download this manual
This product works with the following operating
Windows XP, Windows
system software:
2000
Before You Begin
You must have at least the following:
•
A desktop computer with an available 32-bit PCI slot
•
At least a 300 MHz processor and 32MB of memory
•
An 802.11g or 802.11b Access Point (for Infrastructure Mode) or another 802.11g
or 802.11b wireless adapter (for Ad-Hoc; Peer-to-Peer networking mode.)
Check Your Package Contents
These are the items included with your DWL-G510 purchase:
If any of the above items are missing, please contact your reseller.
Installing the Drivers
Turn on the computer
DWL-G510 Driver CD in the CD-ROM drive.
The step-by-step instructions that follow are shown in
Windows XP. The steps and screens are similar for the
other Windows operating systems.
©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders.
DWL-G510 AirPlus
CD-ROM (containing Drivers, Manual and Warranty)
and
Insert
the
Software and specifications subject to change without notice. DWL-G510 .09242004
G Wireless G PCI Adapter
®
D- Link AirPlus
®
G
1
DWL-G510
AirPlus® G
Wireless G PCI Adapter
Do
NOT
the DWL-G510
Wireless G PCI Adapter
into your computer
before installing the
driver software from
the D-Link CD!
install

Advertisement

Table of Contents
loading

Related Manuals for D-Link AirPlus G DWL-G510

Summary of Contents for D-Link AirPlus G DWL-G510

  • Page 1 Windows XP. The steps and screens are similar for the driver software from other Windows operating systems. the D-Link CD! ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and specifications subject to change without notice. DWL-G510 .09242004...
  • Page 2 Installing the Drivers (continued) Click Install Drivers If the CD Autorun function does not automatically start on your computer, type “D:\Drivers\setup.exe.” If it does start, proceed to the next screen. Click Next Click Next Select No I will restart my computer later Click Finish Shut down...
  • Page 3 Installing the DWL-G510 Adapter in Your Computer 32-bit connector This is the connector that Antenna fits into the PCI slot on your Used to wirelessly computer’s motherboard. connect to WiFi networks. Power/Activity LED Indicates that the DWL-G510 is properly installed when the computer is on and blinks when data is being transmitted.

  • Page 4: Restart Your Computer

    Restart Your Computer When you restart your computer this Found New Hardware Wizard (Windows XP) screen may appear: Select Install the software automatically (Recommended) Click Next For Windows XP: This Hardware Installation alert screen will appear. Click Continue Anyway Click Finish to finalize the installation.
  • Page 5 Your Installation is Complete! After you’ve continued in Windows 2000, ME, or 98SE, the D-Link AirPlus™ G DWL-G510 Configuration Utility will automatically start and the utility icon will appear in the bottom right hand corner of the desktop screen (systray). If this icon...

  • Page 6: Windows Xp

    Appendix A- Using the Air Plus ® G Utility in Windows XP For Windows XP, if you wish to use the AirPlus ® G utility, please do the following steps. Click the XP Networking icon to use the Zero Configuration Wireless Settings.
  • Page 7 Appendix B - Using the Air Plus ® G Utility • Status: Displays the MAC Address of the Access Point that is associated with the DWL-G510. • SSID: Displays the Service Set Identifier assigned to the wireless network. • Frequency: Displays the current frequency used by the adapter. •...
  • Page 8 Appendix B - Using the Air Plus ® G Utility (continued) • SSID: The Service Set Identifier is the name assigned to the wireless network. The factory SSID setting is set to default. Make changes here to match the SSID on existing Wireless Router or Access Point.

  • Page 9: Appendix C - Ip Address Configuration

    Appendix C - IP Address Configuration To connect to a network, make sure the proper network settings are configured for DWL-G510. Microsoft Windows XP: Go to Start > right click on My Network Places > select Properties > Double-click on the Network Connection associated with the DWL-G510.

  • Page 10: For Windows 2000 Users

    Appendix C - IP Address Configuration (continued) For Windows 2000 users: Go to Start > Settings > Network and Dial-up Connections > Double-click on Local Area Connection associated with the DWL-G510 > select Properties Click Internet Protocol (TCP/IP) Click Properties Dynamic IP Address setup Used when a DHCP server...
  • Page 11 Notes...
  • Page 12 Support cal Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.

Table of Contents