Section 2: Insert the DFE-670TXD into your Laptop Section 3: Finishing the Windows Installation Section 4: Technical Support Package Contents: Verify that your D-Link DFE-670TXD package contains the following items. If any items are missing, please contact your reseller. D-Link DFE-670TXD Drivers on CD-ROM...
Pre-Installing the Windows XP, 2000, Me and 98/98se Driver With your computer ON, insert the Driver CD of the DFE-670TXD into your CD-ROM Drive. The Autorun Screen will appear as shown here. Select “Install Drivers” to pre- install the drivers onto your computer.
You must first install the drivers as explained in Section 1. If you have not done this and you have inserted the DFE-670TXD into the PC Card slot, you will need to cancel the New Hardware Wizard, and start over at the beginning of this installation guide.
Finishing the Windows Installation To complete the installation of the DFE-670TXD: Make sure that the DFE-670TXD CD-ROM is inserted in the CD-ROM drive The DFE-670TXD is inserted into your laptop The laptop is turned ON See the section below that corresponds to your Operating System to...
Technical Support You may need to configure the DFE-670TXD before you can access your network. Refer to the manual, located on the Driver CD. The most recent software and user documentation is on the D-Link website. D-Link provides free technical support for customers within the United States during the warranty period on this product.