Packing List - D-Link DSL-G604T User Manual

nformation you will need about your DSL-G604T ADSL Router:
Username
Password
LAN IP addresses for the
DSL-G604T
LAN Subnet Mask for the
DSL-G604T
Information you will need about your LAN or computer:
Ethernet NIC
DHCP Client status
It is recommended that you collect and record this information here, or in some other secure place, in case you
have to re-configure your ADSL connection in the future.
Once you have the above information, you are ready to setup and configure your DSL-G604T ADSL Router.

Packing List

Open the shipping carton and carefully remove all items. Make sure that you have the items listed here.
1. One DSL-G604T 802.11g Wireless ADSL Ethernet Router
2. One CD-ROM containing the User's Guide
3. One twisted-pair telephone cable used for ADSL connection
4. One straight-through Ethernet cable
5. One 12V, 1.2A power adapter suitable for your electric service
6. One Quick Installation Guide
7. Rubber stand
DSL-G604T Wireless A DSL Router User's Guide
This is the Username needed access the Router's
management interface. When you attempt to connect to the
device through a web browser you will be prompted to enter
this Username. The default Username for the Router is
admin. The user cannot change this.
This is the Password you will be prompted to enter when you
Router
access the 's management interface. The default
Password is admin. The user may change this.
This is the IP address you will enter into the Address field of
your web browser to access the Router's configuration
graphical user interface (GUI) using a web browser. The
default IP address is 192.168.11 and it is referred to as the
"Management IP" address in this User's Manual. This may be
changed to suit any IP address scheme the user desires. This
address will be the base IP address used for DHCP service
on the LAN when DHCP is enabled.
This is the subnet mask used by the DSL-G604T, and will be
used throughout your LAN. The default subnet mask is
255.255.255.0 - this can be changed later.
If your computer has an Ethernet NIC, you can connect the
DSL-G604T to this Ethernet port using an Ethernet cable.
You can also use the Ethernet ports on the DSL-G604T to
connect to other computer or Ethernet devices.
Your DSL-G604T ADSL Router is configured, by default, to
be a DHCP server. This means that it can assign an IP
address, subnet mask, and a default gateway address to
computers on your LAN. The default range of IP addresses
the DSL-G604T will assign are from 192.168.1.2 to
192.168.1.254. Your computer (or computers) needs to be
configured to Obtain an IP address automatically (that is,
they need to be configured as DHCP clients.)
4
Record info here
Record info here