Using The Setup Wizard - D-Link DSL-G604T User Manual

Directory Configuration and Read-only Menus
Click the Home tab to access the Setup Wizard, Wireless LAN setup, WAN
Configuration, LAN IP Configuration, DHCP for the LAN Setup and DNS
Home
Configuration menus.
Click the Advanced tab to access the Virtual Server, IP Filters, IP Routing, DMZ,
Advanced Firewall, RIP, PPP, ADSL, ATM VCC, Wireless Performance and Wireless
Management menus.
Click the Tools tab to access the Administrator Settings (used to set the system user
name and password), System Time Configuration, System Settings (load and save
Tools
configuration files), Firmware Upgrade, Administrator Settings (save & reboot) and
Diagnostic Test menus.
Click the Status tab to view the Device Information, Event Log, Traffic Statistics and
Status
ADSL Status information windows.
The Help menu presents links to pages that explain various functions and services
Help
provided by the Router.

Using the Setup Wizard

To use the Setup Wizard, click the Run Wizard button in the first browser window and follow the instructions
in the pop-up window that appears.
The first window summarizes the setup process. Click the Next button to proceed. You may stop using the Setup
Wizard at any time by clicking the Exit button. If you exit the wizard you will return to the first page without
saving any of the settings changed during the process.
Set a password that is required to make changes to the configuration settings of the Router in the Advanced
Configurations menus. Type in a password and verify it by typing a second time. Click Next to continue.
The first window of the Setup Wizard lists the basic
steps in the process. These steps are as follows:
1. Set your new system password.
2. Set the system time.
3. Configure the connection to the Internet.
4. Save the new configuration settings and
reboot the system.