Before You Start; Packing List - D-Link DIR-100 User Manual

Before You Start

Please read and make sure you understand all the prerequisites for proper installation of your new
Router. Have all the necessary information and equipment on hand before beginning the installation.
Overview
The procedure to install the Router can be described in general terms in the following steps:
1. Gather information and equipment needed to install the device. Before you begin the actual
installation make sure you have all the necessary information and equipment.
2. Install the hardware, that is, connect the cables to the device and connect the power adapter.
3. Check the IP settings on your computer and change them if necessary so the computer can access
the web-based software built into the Router.
4. Use the web-based management software to configure the device to suit the requirements of your
ISP account.

Packing List

Open the shipping carton and carefully remove all items. In addition to this Manual, ascertain that you
have:





If any of the above items are missing, please contact your reseller.
DIR-100 Triple Play Router
DIR-100 Ethernet Broadband Router
Power Adapter
Ethernet Cable
Quick Installation Guide
Manual on CD
CAUTION: The Router must be used with the
power adapter included with the device.
iii