Impecca IWA06-KR15 User Manual page 15

STEP 3: FOAM SEAL ON WINDOW FRAME
• Affix the foam seal (with adhesive
the window sash.
STEP 4: MOUNT THE UNIT IN THE WINDOW
FRAME
1. With the help of another person, center the unit on the
windowsill. The lower rail should be completely flush
with the windowsill. Gently lower the window until it
holds the upper rail in place. The chassis and frames are
configured to allow for a natural pitch towards the outside of about 3-5°.
2. Extend the window fillers to the right and left edge of the window.
3. Fasten the upper rail and top corners of the window filler panels to the window
frame with screws. Use the frame locks to attach the bottom corners to the window-
sill.
G
) to the bottom of
–15–