Table of Contents
Advertisement
DVC-2000 User's Manual
Port Configuration
Using the DVC-2000 with D-Link Routers
Most D-Link routers support a feature that allows easy one-click configuration of the
DVC-2000. You will not need to manually configure the ports. Upgrading your router to
the latest firmware might be necessary to support this feature. If you have other routers
or you are having difficulty with the DVC-2000, please read the information on the next
three pages to learn how to open ports on routers.
To complete the configuration that allows the DVC-2000 to work with your D-Link router,
the D-Link DI-614+ router is shown above. In the DI-614+ configuration utility, go to the
Advanced>Virtual Server screen and check the DVC-1000 box in the Virtual Servers
List. Click on Apply. No additional configuration is needed with supported D-Link routers.
Note: The DVC-1000 is an earlier i2eye product already supported by D-Link routers
that uses the same port settings as the DVC-2000.
D-Link Systems, Inc.
Port Configuration
51
Advertisement
Table of Contents
