Getting Started
Getting Started
BEFORE YOU BEGIN!
Read the section on Opening Ports on Routers and Gateways starting on page
52 in this manual if you are using the DVC-2000 VideoPhone with a router, gateway
or broadband modem.
The DVC-2000 needs to be setup before use. You can use the Quick
Installation Guide (included with the DVC-2000) to perform the hardware
installation. Each cable (Ethernet, phone, and AC power) supplied for the i2eye has a
different color on the end that connects to the DVC-2000. Plug the cables into the
matching color coded connector on the back of DVC-2000 (as shown on page 7).
There is an easy to use Setup Wizard built-in to the DVC-2000 to accomplish the setup.
You will need to enter your name, a videophone number, and your Internet connection
information in order to use your VideoPhone.
10
DVC-2000 User's Manual
D-Link Systems, Inc.