D-Link xStack DGS-3612G series Cli Manual page 203

xStack
show mld_snooping mrouter_ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To display the MLD snooping multicast router port settings:
DGS-3627:5#show mld_snooping mrouter_ports
Commands : show mld_snooping mrouter_ports
VLAN Name
Static mrouter port
Dynamic mrouter port
Forbidden mrouter port
Total Entries : 1
DGS-3627:5#
show mld_snooping forwarding
Purpose
Syntax
Description
Parameters
Restrictions
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
Used to display the current router ports set on the Switch.
show mld_snooping mrouter_ports {vlan<vlan_name 32} {[static |
dynamic | forbidden]}
This command display the current router ports set on the Switch.
vlan <vlan_name 32> − The name of the VLAN on which the router port
resides.
static – Displays router ports that have been statically configured.
dynamic – Displays router ports that have been dynamically configured.
forbidden – Displays router ports that have been configured as forbidden.
If no parameter is specified, the Switch will display all currently configured
router ports on the Switch.
None.
: default
: 1-10
:
:
Used to display the MLD snooping forwarding table entries on the Switch.
show mld_snooping forwarding {vlan <vlan_name 32>}
This command will display the current MLD snooping forwarding table entries
currently configured on the Switch.
<vlan_name 32> − The name of the VLAN for which to view MLD snooping
forwarding table information.
None.
200