D-Link xStack DGS-3612G series Cli Manual page 164

xStack
disable address_binding dhcp_snoop
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To disable address_binding dhcp_snoop on the Switch:
DGS-3627:5#disable address_binding dhcp_snoop
Command: disable address_binding dhcp_snoop
Success.
DGS-3627:5#
clear address_binding dhcp_snoop binding_entry ports
Purpose
Syntax
Description
Parameters
Restrictions
Example usage:
To clear address_binding dhcp_snoop binding entries specific ports on the Switch:
DGS-3627:5#clear address_binding dhcp_snoop binding_entry ports 1:1-1:2
Command: clear address_binding dhcp_snoop binding_entry ports 1:1-1:2
Success.
DGS-3627:5#
®
DGS-3600 Series Layer 3 Gigabit Ethernet Managed Switch CLI Manual
To disable the address binding auto mode.
disable address_binding dhcp_snoop
When the DHCP snoop function is disabled, all of the auto-learned binding
entries will be removed.
None.
Only Administrator and Operator-level users can issue this command.
To clear the address binding entries learned for the specified ports.
clear address_binding dhcp_snoop binding_entry ports
[<portlist>|all]
To clear the address binding entries learned for the specified ports.
ports − Specifies the list of ports that you would like to clear the DHCP-
snoop learned entry.
Only Administrator and Operator-level users can issue this command.
161