Advertisement
IMPORTANT LABEL LOCATIONS
This page shows examples of the Nautilus® Leverage Strength® warning labels and communication stickers placed on the equipment
as part of the manufacturing process. It is critical that owners maintain the integrity and placement of these stickers. If you find any
stickers missing or damaged each sample indicated includes its corresponding part number so that replacements may be ordered.
NOTE: STICKERS AND LABELS ARE NOT SHOWN TO SCALE
TRICEPS PRESS
TRICEPS PRESS
READ ALL SAFETY WARNINGS PRIOR TO USE
ADJUST STARTING PRE STRETCH RANGE OF MOTION
BY GRASPING RED ADJUSTMENT BAR LOCATED AT
THE SEAT BASE AND RAISING OR LOWERING SEAT
POSITION
IN THE SEATED POSITION ADJUST PAD DOWN TO
UPPER THIGH BY GRASPING THE RED KNOB
POSITION HANDS IN DESIRED LOCATION FOR
PRESSING DOWNWARD
INITIATE MOVEMENT BY EXTENDING THE ELBOWS IN
A SLOW CONTROLLED MOTION
= PMS 355 C
PRIMARY
TRICEPS
SECONDARY
= PMS 152 C
PECTORALS, DELTOIDS
®
THIS MACHINE IS EQUIPPED WITH LOCK N LOAD
®
TECHNOLOGY.
= PMS 1805 C
ON
FOR WEIGHT SELECTION, SWITCH DESIRED PLATE TO THE
OFF
POSITION. ALL OTHER PLATE SHOULD BE IN THE
POSITION.
= PMS
HEXACHROME
CAUTION
PRUDENCE
VORSICHT
BLACK C
731-7081-USA
Instruction Placard
Instruction Placard
Serial Label
Serial Label
731-0517
Bolt Down Label
Bolt Down Label
Page 5
Advertisement
